Availability: | |
---|---|
Quantity: | |
DK-1
WENYUAN
8472902100
SPECIFICATION
Drill head(spindle) quantity:1
Max drill depth:30mm
Hole diameter:2.0-8.0mm
Feeding width:275mm
Min feeding size:30*30mm
Paper fixing mode:Parallel sides clamping and Right angle sides clamping
Back gauge margin range:7-32mm(parallel)
Drill mode:Electric+manual
Structure:Fixed drill head+fixed plate
Work plate size:330*210mm
Machine dimension:33*37x*32.5cm
Voltage:220V(110V)±10%,50HZ(60HZ)
Power:80W
Machine weight:12kg
SPECIFICATION
Drill head(spindle) quantity:1
Max drill depth:30mm
Hole diameter:2.0-8.0mm
Feeding width:275mm
Min feeding size:30*30mm
Paper fixing mode:Parallel sides clamping and Right angle sides clamping
Back gauge margin range:7-32mm(parallel)
Drill mode:Electric+manual
Structure:Fixed drill head+fixed plate
Work plate size:330*210mm
Machine dimension:33*37x*32.5cm
Voltage:220V(110V)±10%,50HZ(60HZ)
Power:80W
Machine weight:12kg
D1(Hole Diameter):2.0/2.5/3.0/3.5/4.0/5.0/6.0/7.0/8.0mm
D2(Shank Diameter):11mm
L1(Total Length):65mm
L2(Drill Depth):20mm(D1=2.0 or 2.5mm),30mm(D1≥3.0mm)
D1(Hole Diameter):2.0/2.5/3.0/3.5/4.0/5.0/6.0/7.0/8.0mm
D2(Shank Diameter):11mm
L1(Total Length):65mm
L2(Drill Depth):20mm(D1=2.0 or 2.5mm),30mm(D1≥3.0mm)
DRILLING TIPS
Keep drill bits and spindles clean,clean drill bits after each usage and apply a light oil to the inside & outside to avoid rust.
Set the drill bits correctly.Make sure that the drill shank is at the top end and fixed.
Change the position of the pad frequently,replace the drill bits and pads according to workload requirement.
Store the drilling machine and drill bits in a dry and ventilated place.
Remember to empty the waste-paper box.
DRILLING TIPS
Keep drill bits and spindles clean,clean drill bits after each usage and apply a light oil to the inside & outside to avoid rust.
Set the drill bits correctly.Make sure that the drill shank is at the top end and fixed.
Change the position of the pad frequently,replace the drill bits and pads according to workload requirement.
Store the drilling machine and drill bits in a dry and ventilated place.
Remember to empty the waste-paper box.