Availability: | |
---|---|
Quantity: | |
U-WB50
WENYUAN
8472902100
SPECIFICATION
Drill head(spindle) quantity:1
Max drill depth:50mm
Hole diameter:3.0-8.0mm
Feeding width:420mm
Back gauge margin range:6-30mm
Drill mode:Electric+manual
Structure:Fixed drill head+movable plate
Hole(Spindle) distance:5 fixed modes by pitch bar
3H:-108-108-
4H:-45-65-45-
-70-70-70-
-80-80-80-
6H:-19-19-50-19-19-
Work plate size:460*255mm
Machine dimension:46*43*50cm
Voltage:220V(110V)±10%,50HZ(60HZ)
Power:120W
Machine weight:22kg
PACKING INFO
1PC/CTN,G.W.:24kg
Packing Size:63*40*70cm
SPECIFICATION
Drill head(spindle) quantity:1
Max drill depth:50mm
Hole diameter:3.0-8.0mm
Feeding width:420mm
Back gauge margin range:6-30mm
Drill mode:Electric+manual
Structure:Fixed drill head+movable plate
Hole(Spindle) distance:5 fixed modes by pitch bar
3H:-108-108-
4H:-45-65-45-
-70-70-70-
-80-80-80-
6H:-19-19-50-19-19-
Work plate size:460*255mm
Machine dimension:46*43*50cm
Voltage:220V(110V)±10%,50HZ(60HZ)
Power:120W
Machine weight:22kg
PACKING INFO
1PC/CTN,G.W.:24kg
Packing Size:63*40*70cm
D1(Hole Diameter):3.0/3.5/4.0/5.0/6.0/7.0/8.0mm
D2(Shank Diameter):11mm
L1(Total Length):78mm
L2(Drill Depth):30mm(D1=3.0 or 3.5mm)
40mm(D1=4.0mm)
50mm(D1≥5.0mm)
D1(Hole Diameter):3.0/3.5/4.0/5.0/6.0/7.0/8.0mm
D2(Shank Diameter):11mm
L1(Total Length):78mm
L2(Drill Depth):30mm(D1=3.0 or 3.5mm)
40mm(D1=4.0mm)
50mm(D1≥5.0mm)
DRILLING TIPS
Keep drill bits and spindles clean,clean drill bits after each usage and apply a light oil to the inside & outside to avoid rust.
Set the drill bits correctly.Make sure that the drill shank is at the top end and fixed.
Change the position of the pad frequently,replace the drill bits and pads according to workload requirement.
Store the drilling machine and drill bits in a dry and ventilated place.
Remember to empty the waste-paper box.
DRILLING TIPS
Keep drill bits and spindles clean,clean drill bits after each usage and apply a light oil to the inside & outside to avoid rust.
Set the drill bits correctly.Make sure that the drill shank is at the top end and fixed.
Change the position of the pad frequently,replace the drill bits and pads according to workload requirement.
Store the drilling machine and drill bits in a dry and ventilated place.
Remember to empty the waste-paper box.