Model: | |
---|---|
Availability: | |
Quantity: | |
U-ZD500V2
WENYUAN
8472902100
SPECIFICATION
Model | ZD500V2 | ||
Drill head(spindle) quantity | 2 | 3 | 4 |
Max drill depth | 50mm | ||
Feeding Width | 450mm | ||
Hole diameter | 3.0-10.0mm | ||
Back gauge margin range | 5.5-37.5mm | ||
Drill mode | Automatic | ||
Structure | Movable drill heads+fixed plate | ||
Hole(Spindle) distance | 45-220mm | 45-110mm | 45-85mm |
Work plate size | 520*280mm | ||
Display | 4.3 touch screen | ||
Machine dimension | 52*67.5*63cm | ||
Voltage | 220V(110V)±10%,50HZ(60HZ) | ||
Power | 1000W | ||
Machine weight | 125kg | 128kg | 135kg |
SPECIFICATION
Model | ZD500V2 | ||
Drill head(spindle) quantity | 2 | 3 | 4 |
Max drill depth | 50mm | ||
Feeding Width | 450mm | ||
Hole diameter | 3.0-10.0mm | ||
Back gauge margin range | 5.5-37.5mm | ||
Drill mode | Automatic | ||
Structure | Movable drill heads+fixed plate | ||
Hole(Spindle) distance | 45-220mm | 45-110mm | 45-85mm |
Work plate size | 520*280mm | ||
Display | 4.3 touch screen | ||
Machine dimension | 52*67.5*63cm | ||
Voltage | 220V(110V)±10%,50HZ(60HZ) | ||
Power | 1000W | ||
Machine weight | 125kg | 128kg | 135kg |
D1(Hole Diameter):3.0/3.5/4.0/5.0/6.0/7.0/8.0mm
D2(Shank Diameter):11mm
L1(Total Length):78mm
L2(Drill Depth):30mm(D1=3.0 or 3.5mm)
40mm(D1=4.0mm)
50mm(D1≥5.0mm)
D1(Hole Diameter):3.0/3.5/4.0/5.0/6.0/7.0/8.0mm
D2(Shank Diameter):11mm
L1(Total Length):78mm
L2(Drill Depth):30mm(D1=3.0 or 3.5mm)
40mm(D1=4.0mm)
50mm(D1≥5.0mm)
DRILLING TIPS
Keep drill bits and spindles clean,clean drill bits after each usage and apply a light oil to the inside & outside to avoid rust.
Set the drill bits correctly.Make sure that the drill shank is at the top end and fixed.
Change the position of the pad frequently,replace the drill bits and pads according to workload requirement.
Store the drilling machine and drill bits in a dry and ventilated place.
Remember to empty the waste-paper box.
DRILLING TIPS
Keep drill bits and spindles clean,clean drill bits after each usage and apply a light oil to the inside & outside to avoid rust.
Set the drill bits correctly.Make sure that the drill shank is at the top end and fixed.
Change the position of the pad frequently,replace the drill bits and pads according to workload requirement.
Store the drilling machine and drill bits in a dry and ventilated place.
Remember to empty the waste-paper box.